Z2 type swelling coupling sleeve, Z3 type swelling inner and outer cone ring, Z5 type swelling coupling sleeve

The ZLD conical shaft hole elastic gear coupling is suitable for the transmission shaft system of the coaxial line. The longitudinal section shear strength of the nylon rod is used to transmit the torque, which can transmit a large torque of 100~500000N.m. The working temperature is- 20~70℃, it can partially replace the gear coupling. It has the ability to compensate the shaft and the general shock absorption...

The ZL-type elastic pin gear coupling is a pin made of several non-metallic materials and placed in the mating hole between the two coupling halves and the inner surface of the outer ring; the two pins are used to transmit torque. Half coupling is connected. ...

The ZLZ intermediate shaft elastic pin gear coupling is suitable for the transmission shaft system of the coaxial line. The longitudinal section shear strength of the nylon rod can be used to transmit a large torque. The working temperature is -20-70 degrees, which can be partially Instead of gear couplings, it has the ability to compensate for axial deviation and general shock absorption performance. ...

The ZLL wheel elastic pin gear coupling does not need lubrication, which not only saves lubricating oil, but also purifies the working environment. Applicable occasions: The elastic pin gear coupling has the performance of compensating the relative deviation of the two shafts, and is suitable for medium and relatively High-power transmission is not suitable for work that has requirements for vibration reduction and strict noise control...

Torque limiter, also known as clutch and coupling, is often installed between the active and passive sides of the power transmission. When an overload fault occurs (torque exceeds the set value), the torque limiter will be separated to protect the drive Machinery (such as motor, reducer, servo motor) and load, common shape...

The brake wheel includes an annular outer end surface and a shaft hole arranged on the center of the outer end surface, and is characterized in that a main rib is arranged along the center line of the inner wall of the outer end surface, and the other end of the main rib is connected with the shaft sleeve.The brake wheel has a long service life and high performance. ...

Encoders and micro couplings are devices that compile and convert signals (such as bit streams) or data into signal forms that can be used for communication, transmission and storage. The encoder converts angular displacement or linear displacement into electrical signals, the former is called It is a code wheel, and the latter is called a yardstick. ...

The cross slider coupling is also called the slider coupling. It consists of two half couplings with grooves on the end faces and an intermediate disc with convex teeth on both sides, because the convex teeth can be in the groove Sliding, so it can compensate the relative displacement between the two axes during installation and operation. ...

GL type roller chain coupling can be used for shafting transmission of textile, agricultural machinery, lifting and transportation, engineering, mining, light industry, chemical industry and other machinery. It is suitable for high temperature, humidity and dusty working conditions. It is not suitable for high-speed, In the case of severe impact load and transmission of axial force, the chain coupling should be well lubricated and have...

KC sprocket coupling can be used for shafting transmission of textile, agricultural machinery, lifting and transportation, engineering, mining, light industry, chemical industry and other machinery. It is suitable for high temperature, humidity and dust. Frequent start-up, frequent forward and reverse rotation, and more severe The occasion of impact load and torsional vibration is not suitable for the occasion of high speed and transmission of axial force. The chain...