Z2 type swelling coupling sleeve, Z3 type swelling inner and outer cone ring, Z5 type swelling coupling sleeve

LT elastic sleeve pin coupling relies on the locking force of the pin group to generate the frictional moment on the contact surface, and compress the rubber elastic sleeve to transmit the torque.It is suitable for small and medium-power shafting transmissions with good rigidity of the installation base, high centering accuracy, low impact load and low vibration reduction requirements. ...

The middle sliding block of the three-jaw coupling for the pump is made of cloth-clipped bakelite or polyurethane. It is light in weight, simple in structure, easy to install, and inexpensive. It is often used in small power applications. It is suitable for small torque, high speed, and no Two-axis connection with a sharp impact. ...

In addition to the elastic coupling's function of buffering and absorbing vibration, the magnetic pump coupling has the major feature that it breaks the traditional coupling structure and adopts a new principle of magnetic coupling to achieve no passage between the driving shaft and the driven shaft. Direct contact can transmit force and moment, and can...

The elastic sleeve pin coupling for pump uses a pin with an elastic sleeve (rubber material) at one end, which is installed in the flange hole of the two halves of the coupling to realize the connection of the two halves of the coupling. The material of the shaft device is cast iron, and its weight is 38.8 kg, which makes the motor waste a lot of...

TL type elastic sleeve pin coupling is based on the locking force of the pin group to generate the friction torque on the contact surface, and compress the rubber elastic sleeve to transmit the torque. It is suitable for the installation base with good rigidity and high centering accuracy. Small and medium power shafting transmissions with little impact load and low requirements for vibration reduction. ...

JZM type diaphragm coupling for heavy machinery has large load capacity, light weight, small structure size, transmission efficiency and transmission, good performance, easy assembly and disassembly, and has no relative sliding, no lubrication, long service life, no Noise, acid and alkali resistance, etc., can be used in high temperature, low temperature and oil, water and...

The HL type-elastic pin coupling is a pin made of several non-metallic elastic materials, which is placed in the flange hole of the two halves of the coupling, and the two halves of the coupling are connected by the pin. The coupling structure Simple, easy to manufacture, easy to assemble, disassemble and replace the elastic element, without moving the two couplings. ...

HLL type-elastic pin coupling with brake wheel has a working temperature of -20～+80℃; the nominal torque of transmission is 40～20000N.m. HLL type-elastic pin coupling with brake wheel has a relatively large structure, simple and reasonable, convenient maintenance, symmetrical and interchangeable on both sides, long life, allowing large axial movement, buffering, shock absorption...

The JS-type casing radial mounting coupling has a simple structure and is convenient for assembly and disassembly. The whole machine has few parts, small size and light weight. The spring leaf designed as a trapezoidal cross-section and the trapezoidal tooth groove are particularly convenient and tight, thus making the assembly Dismantling and maintenance are easier than general couplings. ...

The J-type axial installation coupling is used in a variety of different host products, and the surrounding working environment is more complicated, such as temperature, humidity, water, steam, dust, sand, oil, acid, alkali, corrosive medium, salt water, radiation, etc. Condition is one of the important factors to consider when choosing a coupling. ...