Torque limiter
What is a torque limiter?
Torque limiter is also called torque limiter,Coupling,The clutch is a component that connects the driving machine and the working machine.
The use of torque limiter:
When the machine fails, it restricts the transmission of the transmission system in a sliding manner to protect the equipment.Mainly used in printing equipment, battery industry, iron scrap conveyor, conveying production line, divider, etc.
Torque limiter is also known asclutch,Couplings are often installed between the active and passive sides of the power transmission. When an overload fault occurs (torque exceeds the set value), the torque limiter will be separated, thereby protecting the driving machinery (such as motors, reducers) , Servo motor) and load, the common forms are: friction type torque limiter and ball type torque limiter.
Application range of torque limiter:
Torque limiters are widely used in electronic equipment industry, automated production lines, conveyor industries, etc.
Choice of torque limiter:
1. The required sliding torque is determined by the load conditions or the design strength of the machine.If the load condition of the machine is ominous, set the slip torque of the torque limiter to 1~5 times the torque produced by the motor related to the installed shaft.
2. Please select a torque limiter with sufficient torque range and inner diameter range.The correct sleeve length is determined by the thickness of the central member located between the friction plates.The selection of the shaft sleeve should not be greater than the width of the central member. The thickness of the central member can be automatically reset. After overload, the driver can be automatically reset after restarting the driver;Position reset function, position degree or repeat position degree after overload; torque is simple and easy to adjust and easy to read, just turn the adjusting nut, and then use the dial and torque indicator to easily adjust the disengagement torque value to the setting value.
