TGL type nylon inner gear ring drum gear coupling, NGCLZ type drum gear coupling with brake wheel, WGP drum gear coupling with brake disc

The internal and external teeth of the gear coupling are used for a long time, and the speed is too high, which will cause the coupling itself to be thermally deformed. In this regard, the designer has made some analysis and conclusions, and it is particularly important to control the heat treatment deformation of the gear. ...

For processing couplings, the data is still based on the standards of the Ministry of Machinery. If the coupling is designed without authorization, the torque is too large or the torque is too small, it will affect the use of the coupling. ...

If it is replaced on the original equipment, it should generally be the same as the original direction. If it is a newly designed and manufactured equipment, it should not interfere with other surrounding parts, and the more the inner and outer teeth are combined. Principle installation. ...

Gear couplings are matched by internal teeth and external teeth to transmit motion. Therefore, the height of the internal teeth and external teeth depends on the torque transmitted by the coupling. Therefore, the coupling factory designers should try their best to make the coupling when designing. The internal and external teeth of the shaft are designed with large values, and the service life of the coupling has been reached. ...

Couplings have double-end tooth profile, single-end tooth profile, jaw type, spring leaf type, disc spring, cross slide type and roller chain type. Due to different types, some are lubricated with lubricating oil, and there are The ones are lubricated with grease. ...