Hebei SWPG type has telescopic ultra-short universal coupling
The SWPG type has the characteristics and application of the telescopic ultra-short universal coupling: the bearing is a vulnerable part.In order to facilitate the replacement of the bearing, the bearing housing gland is made into a split type, bolted connection, and can work under β≤5°～10° working conditions. SWPG type has a telescopic ultra-short universal coupling suitable for steel rolling machinery, lifting and transporting machinery, construction machinery, mining machinery, petroleum machinery and other heavy machinery, connecting two shaft transmissions with different axes, can not buffer or reduce vibration . Type A--with telescopic long type; Type B--with telescopic short type; Type C--without telescopic short type; Type D--without telescopic long type; Type E--with telescopic double flange long type; F type --Large telescopic long type; ZG type--formal installation through type FG type--reverse installation through type
SWPG type has the characteristics of telescopic ultra-short universal coupling:
1. It has a large angle compensation method, and the transmission obedience is high.
2. The layout is tightly patched together, and the torque conveyed by the remaining types of couplings that communicate with the rotating diameter is compared.
Carrying stability, SWCSWPG type has telescopic ultra-short universal coupling is a kind ofCommonly used couplings.Utilizing the characteristics of its structure, it can make two shafts that are not on the same axis or that have a large angle of axis or that have a large axial movement continue to rotate at equal angular speed, and transmit torque and motion simultaneously.It can be widely used in metallurgy, lifting, engineering transportation, mining, petroleum, shipbuilding, coal, rubber, papermaking machinery and other machinery shafting to transmit torque in the heavy machinery industry.
There are many types of couplings. According to the relative position and position changes of the two shafts to be connected, they can be divided into: ①Fixed couplings.It is mainly used in places where two shafts require strict alignment and no relative displacement during work. The structure is generally simple, easy to manufacture, and the instantaneous speed of the two shafts is the same, mainly including flange couplings, sleeve couplings, and clamps Shell couplings, etc. ②Removable coupling.It is mainly used where the two shafts are deviated or have relative displacement during work. According to the method of compensating displacement, it can be divided into rigid movable coupling and elastic movable coupling.Rigid movable coupling uses the dynamic connection between the working parts of the coupling to have a certain direction or several directions of mobility to compensate, such as jaw coupling (allowing axial displacement), cross groove coupling (Used to connect two shafts with small parallel displacement or angular displacement), universal coupling (used in places where the two shafts have a large deflection angle or a large angular displacement during work), gear coupling (Comprehensive displacement allowed), chain couplings (radial displacement allowed), etc., elastic movable couplings (referred to as elastic couplings) use the elastic deformation of elastic elements to compensate for the deflection and displacement of the two shafts, and at the same time Elastic elements also have cushioning and vibration reduction properties, such as serpentine spring couplings, radial multilayer leaf spring couplings, elastic ring pin couplings, nylon pin couplings, rubber sleeve couplings, etc. .Some couplings have been standardized.When choosing, you should first select the appropriate type according to the work requirements, and then calculate the torque and speed according to the diameter of the shaft, and then find out the applicable model from the relevant manual, and check some key parts.
Hebei SWPG type has telescopic ultra-short universal coupling Hebei SWPG type has telescopic ultra-short universal coupling
