Hebei SWCBF type standard telescopic flange coupling

The SWCBF standard telescopic flange universal coupling makes its center of mass or inertial main axis do not coincide with the axis of rotation due to various reasons, and will produce unbalanced centrifugal inertial force, centrifugal inertial couple force and dynamic deflection (vibration shape) during operation. This phenomenon is called the unbalance of the rotor. This unbalance will inevitably cause the vibration of the shaft system, thereby affecting the normal operation and service life of the machine, so it is important to pay attention to it.The degree of unbalance (unbalance U) is usually expressed by the product mr of the mass m of the rotor and the distance r from the center of mass to the axis of rotation of the rotor, which is called the product of mass diameter.It is also expressed by the product of mass diameter per unit mass, called eccentricity (not geometrically eccentric.) The product of mass diameter mr is a relative quantity related to the mass of the rotor, while the eccentricity e is independent of the mass of the rotor.quantity.The former is relatively intuitive, and is often used for specific balancing operations of a given rotor, while the latter is used to measure the pros and cons of the rotor balance or to check the balance accuracy. The balance grade standard of the coupling is evaluated by e.For a flexible rotor, use the mode eccentricity (the nth mode) en=Un/mn, and Un and mn are the nth mode and the first mode quality respectively.

SWCBF Standard Telescopic Flange Coupling Purpose: A mechanical part used to connect two shafts (driving shaft and driven shaft) in different mechanisms so that they can rotate together to transmit torque.In high-speed and heavy-load power transmission, some couplings also have the function of buffering, damping and improving the dynamic performance of the shafting.The coupling is composed of two halves, which are respectively connected with the driving shaft and the driven shaft.The general power machine is mostly connected with the working machine by means of a coupling.

Coupling selection requirements:

According to the characteristics of the model and the operation of the system, select the appropriate coupling form:

1. Torque

The torque of the coupling should be twice the transmission torque. For example, if the transmission torque is 5 (NM), a coupling with a torque of 10 (N.,) should be selected. The material should be rigid torque. .

2. Flexible/rigid

Flexible couplings can absorb parallel deviation, angular base deviation, and axial displacement, but high-rigidity couplings do not.

3. Applicable occasions-high and low temperature. Acid, select the material of the coupling, whether it can load acid, high and low temperature occasions.

4. With or without backlash

5. Insulation

6. Be vibrating

7. Tolerable speed

8. With protection machinesex

9. Is the aperture range applicable?

Hebei SWCBF type standard telescopic flange coupling　Hebei SWCBF type standard telescopic flange coupling