Introduction:
1. HS collection slurry pump is created for the continuous pumping of large abrasive, EPT slurries with small routine maintenance requirements. The donning areas are manufactured of extremely chrome or and rubber. It will keep substantial effectiveness over the dress in existence of its components.
2. The metal soaked elements and rubber ones can be interchangeable for managing different liquids or slurries.
three. HS slurry pumps are offered in measurements ranging from 1 inch to eighteen inch discharge and characteristic higher efficiency performance capable of stream costs from 10.eight to 5400 m sup3/h and heads up to a hundred twenty five meters for high head designs.
Functions:
1. Cylindrical framework of bearing assembly: convenient to alter the space amongst impeller and JCEP liner
and can beremoved totally
two. Interchangeable anti-abrasive damp components produced of large-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs supply higher operating pressure capabilities
and an additional evaluate of safety.
four. The discharge branch can be oriEPTTd to any eigEPTT positions at the interval of forty five levels
5. Different EPT sorts: DC(immediate connection), V-belt EPT, EPT box EPTT, EPT couplings, VFD,
SCR management, and many others
6. The shaft seal uses the EPTT seal, expeller seal and mechanical seal
Normal Software:
| #8226 Mineral processing | #8226 EPT | #8226 EPTT Washery | #8226 Cyclone feeds |
| #8226 Bentonite | #8226 EPTT slurry | #8226 EPTEPTTng | #8226 Mill grinding |
| #8226 Ash hXiHu (West EPT) Dis.Hu (West EPT) Dis. | #8226 Tunnel | #8226 Waste sludge | #8226 Coarse sand |
| #8226 Lime mud | #8226 Phosphoric acid | #8226 EPTT | #8226 EPTT |
| #8226 Alumina JCEP | #8226 EPTT Plant | #8226 Potash FerEPTTzer Plant | #8226 Other EPTT |
| #8226 Iron ore sand | #8226 JCEP Concentration | #8226 EPT EPT | #8226Molybdenum |
| Model | Max EPTT (Kw) |
Inlet amp Outlet size (inch) | EPT for Use Parts | Stream Rate (Q) | EPT (H) meter |
Velocity (RPM) |
EPTTeller Dia. (mm) |
|
| m sup3/hr | l/s | |||||||
| 25HS-B | fifteen | one.5/one | M | 12.6~28.eight | three.5~eight | six~sixty eight | 1200~3800 | 152 |
| R | ten.8~25.2 | 3~seven | seven~fifty two | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.5 | M | 32.4~72 | 9~twenty | 6~58 | 1200~3200 | 184 |
| R | twenty five.two~54 | 7~15 | 5.five~41 | a thousand~2600 | 178 | |||
| 50HS-C | thirty | 3/two | M | 39.6~86.4 | eleven~24 | 12~sixty four | 1300~2700 | 214 |
| R | 36~seventy five.6 | ten~21 | 13~forty six | 1300~2300 | 213 | |||
| 75HS-C | thirty | 4/three | M | 86.four~198 | 24~55 | nine~52 | 1000~2200 | 245 |
| R | seventy nine.2~180 | 22~50 | 5~34.five | 800~1800 | 245 | |||
| 100HS-D | sixty | six/4 | M | 162~360 | forty~100 | 12~56 | 800~1550 | 365 |
| R | a hundred and forty four~324 | 40~ninety | 12~forty five | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/6 | M | 360~828 | a hundred~230 | ten~61 | five hundred~1140 | 510 |
| R | 324~720 | 90~two hundred | seven~forty nine | 400~a thousand | 510 | |||
| 200MS-E | a hundred and twenty | 10/8 | M | 666~1440 | 185~400 | fourteen~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/eight | M | 612~1368 | 170~380 | 11~61 | 400~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | 12~50 | four hundred~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | 7~sixty eight | three hundred~800 | 762 |
| R | 720~1620 | 200~450 | 7~forty five | three hundred~650 | 762 | |||
| 300HS-TU | 560 | fourteen/12 | M | 1260~2772 | 350~770 | 13~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | thirteen~forty four | 300~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | M | 2520~5400 | 700~1500 | 13~fifty seven | 200~four hundred | 1370 |
| 25HHS-C | thirty | 1.5/1 | M | 16.two~34.two | four.5~nine.5 | 25~ninety two | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/2 | M | sixty eight.four~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | one hundred twenty | four/3 | M | 126~252 | 35~70 | twelve~97 | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | 6/4 | M | 324~720 | ninety~200 | thirty~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | a hundred thirty~280 | 20~ninety four | 500~1000 | 711 |
For the materials of sporting elements,
quotM quot = metal, extremely chromium alloy quotR quot = anti-abrasive rubber
Get in touch with
Welcome to speak to us any time for specifics.
Your inquiry will get our prompt interest and response !
