The relationship between the development of the coupling industry and the development of the steel industry
Couplings are increasingly used in machinery controlled by servo systems. The difference between these couplings and general manufacturing machinery is that they require a high degree of follow-up of the output relative to the input. In recent years, because of the servo motor industry The development, adapting to high-speed and control requirements are increasingly exaggerated. ...
JQ type clamp shell coupling
During assembly and disassembly of the JQ type clamp housing coupling, the shaft does not need to move axially, so the assembly and disassembly are very convenient. The disadvantage of the clamp housing coupling is that the accuracy of the two shaft axes is low, the structure and shape are more complicated, and the manufacturing and balance accuracy Low, only suitable for low speed and stable load occasions, usually the linear speed of the outer edge is not greater than...
WH type slider coupling
The structure of the WH type slider coupling is similar to the cross slider coupling, so it is also called a "slider coupling". The difference is that the middle cross slider is a square slider, and the middle slider is used for half coupling on both sides. The end face of the shaft slides in the corresponding radial groove to realize the coupling of the two halves of the shaft coupling. ...
GB4323-84 polyurethane elastic sleeve
GB4323-84 polyurethane elastic sleeve is mainly used for the accessories of elastic sleeve pin coupling. GB4323-84 polyurethane elastic sleeve has a longer life, better elasticity, more oil resistance than the previous rubber elastic sleeve. It can also be used widely. Polyurethane elastic sleeves for cushioning and damping equipment for water pumps, motors, couplings, etc. ...
Total 1Page / 4 Records