Hebei ZL type elastic pin gear coupling, ZLZ connecting intermediate shaft elastic pin gear coupling, ZLL wheel elastic pin gear coupling

The ZLD conical shaft hole elastic gear coupling is suitable for the transmission shaft system of the coaxial line. The longitudinal section shear strength of the nylon rod is used to transmit the torque, which can transmit a large torque of 100~500000N.m. The working temperature is- 20~70℃, it can partially replace the gear coupling. It has the ability to compensate the shaft and the general shock absorption...

The ZL-type elastic pin gear coupling is a pin made of several non-metallic materials and placed in the mating hole between the two coupling halves and the inner surface of the outer ring; the two pins are used to transmit torque. Half coupling is connected. ...

The ZLZ intermediate shaft elastic pin gear coupling is suitable for the transmission shaft system of the coaxial line. The longitudinal section shear strength of the nylon rod can be used to transmit a large torque. The working temperature is -20-70 degrees, which can be partially Instead of gear couplings, it has the ability to compensate for axial deviation and general shock absorption performance. ...

The ZLL wheel elastic pin gear coupling does not need lubrication, which not only saves lubricating oil, but also purifies the working environment. Applicable occasions: The elastic pin gear coupling has the performance of compensating the relative deviation of the two shafts, and is suitable for medium and relatively High-power transmission is not suitable for work that has requirements for vibration reduction and strict noise control...