Product Description
General Information:
1.Raw material: UPVC
2 .Size: DN15-DN400(1/2″-16″)
3 .Standard: DIN and GB
4 .Usage: WATER SUPPLY
5. Pressure: 1.0Mpa and 1.6Mpa
Features of products:
- Light weight
- Corrosion resistance
- Small friction
- Aging resistance
- High flame retardant
- High strength
- Easy installation
Advantages:
- The specific gravity is only 1 sixth of that of cast iron pipe, convenient installation and transportation, saving time and labor cost.
- Having good acid resistance, alkali resistance and electrochemical corrosion resistance.
- Inner wall is smooth, small flow-resistance, anti-fouling.
- Good chemical stability, and the normal service life can reach about 50 years.
- The flame can extinguish after leaving the fire.
- The tensile strength can reach 45 Mpa, the working pressure can reach 1.6 Mpa at normal temperature.
- Using glue to bond, no need to process thread, convenient and fast working.
HangZhou VODE Plastic Co., Ltd., located in Xihu (West Lake) Dis. district ,HangZhou city , ZHangZhoug province, China, was founded in 2007. It is a CZPT manufacturer specialized in high-tech, high capability, and high reliability UPVC,CPVC piping system and Ultra filtration Membrane housings in China .
Four series of products can be available in HZVODE. The full sizes and models gray UPVC plastic pipe and pipe fittings; Clear UPVC pipes and fittings; The variety of UPVC Ultra filtration membrane housings models; Light gray color of CPVC pipes and fittings. The quality and safety are paid attention seriously. Important certificates and identifications was acquired including the authentication certificate of quality management system – ISO9001 and the approval of sanitary license . After about 15 years of development and innovation, the scale of factory continues to grow, new big factory with 40000 square CZPT will be built and finished in 2571, production capacity and technical strength will be greatly improved in the future. At present, the company introduces automatic intelligent production equipment. there will be more than 80 sets of automatic production equipment had in workshops.
Today, products made by HZVODE have been exported to Japan, Germany, Russia, Spain, Estonia, Hungry, Turkey, Canada, Argentina, Brazil, South Korea, Viet Nam, Singapore, India, Iraq etc countries. The customers are very satisfied with our products, and we have been building long and stable cooperation relationship by now. In home, large amount of distributors have been set up in ZheJiang , ZheJiang , HangZhou, HangZhou, HangZhou, ZheJiang , HangZhou and other cities. The marketing shares in domestic have accounted for big proportion. HZVODE Brand has become very popular in China depending on reliable product quality, reasonable price and good corporate reputation.
In the future, HZVODE will continue to concentrate on making high-tech, high capability, and high reliability products for customers. We insist that development market with perfect products, CZPT quality and reliable reputation, HZVODE will have a broader and more prosperous future.
HZVODE attends 3 important water exhibitions every year in China, they are IE expo China in ZheJiang , International Aquetech in ZheJiang and Water treatment in ZheJiang , Sometimes we will attend the Water Exhibition in HangZhou. the products on display by HZVODE attracted so many visitors at home and abroad, visitors like the products so much!
HZVODE means HangZhou World. We intend to create Domestic Topping Enterprise and forge World Famous Brands in the future. With about 15 years development, HZVODE has been adhering to Unity, pragmatism, innovation and high-performance, today’s VODE has made a great achievement . A big new plant will be finished at the end of 2571, fully automatic operation will be introduced by then. Excellent products and high quality services win customer recognition, which have undertaken so many important domestic projects by HZVODE. Meanwhile, the products made by HZVODE become more and more popular oversea, we have built cooperation with some customers from Japan, Germany, Spain, Russia ets countries. We are sure that more and more customers will know VODE in the near future.
HZVODE is specializing in the plastic UPVC gray pipes and pipe fittings, UPVC clear pipes and fittings, UPVC Ultra filtration membrane shells and CPVC pipes and fittings in China. Full sizes and models of pipe system can be available from HZVODE. Products are widely used in chemical industry, water treatment, bio-technology, environmental protection, medicine, construction, paper, food, fire, electricity and other industries. Company has strong technical strength with a team of professional technical engineers and research team. HZVODE have established close cooperative relations with ZHangZhoug University and ZHangZhoug University of Technology, which are very famous university in China. With advanced imported equipment and raw materials, the products produced surely satisfy your requirement.
HZVODE is the leading company producing Ultra filtration membrane shells as well as their accessories in China, we have about 15 years of professional experience in these products. Many models can be available in HZVODE. The market share in this products accounts for more than 80% in China, almost all customers in China are using HZVODE brand. OEM and ODM can be acceptable in our company, we warmly welcome all customers to join us and work with you together in future!
UPVC gray products:
UPVC product series contain UPVC full sizes of pipes and fittings. Pipes sizes are from DN15 to DN400. According to different wall thickness of pipes, there are 3 kinds of pipes available in HZVODE. They are 1.0Mpa of water supply pipes , 1.6Mpa of water supply pipes and 1.6Mpa of industrial pipes. Industrial chemical pipes have higher acid and alkali resistance, their wall thicknesses are thicker. Pipe fittings are complete, sizes are from DN15 to DN400, working pressures have 1.0Mpa and 1.6Mpa. Fittings have Elbow, Tee, Coupling, Valve, Union, Flange, Cap, Cross, Reducer, Y type Tee etc. The products are processed from formula, production and processing, packing and finally shipping, every procedure is strictly controlled by HZVODE, we strive to be perfect in every detail, and provide every customers with excellent products.
UPVC clear Products:
Depending on the current market demand for transparent products, the sizes of clear products are from DN15-DN150, namely outsize 20mm to 160mm. Clear products have UPVC clear pipes with sizes from 20mm to 160mm, UPVC clear 90 degree Elbow, UPVC clear 45 degree Elbow, UPVC clear Tee, UPVC clear Coupling, UPVC transparent Cap, UPVC transparent Male thread Adaptor, UPVC clear Union as well as UPVC clear Valve. Clear products adopted with UPVC pure raw material to produce, it has higher requirements for product technology, a high transparency, clarity, strength are required, and there are no defects on the products. Every exhibition, transparent products become a highlight on the stand, attracting many customers to visit.
Ultra filtration membrane housings:
HZVODE is the main provider of Ultra filtration membrane shells as well as their accessories for Ultra filtration field in China, we have about 15 years of professional experience in these products. The sizes have 2″, 4″,5″,6″,8″,9″,10″ and 12″ etc. Many models can be available in HZVODE. The market share in this products accounts for more than 80% in China, almost all customers in China are using HZVODE brand. OEM and ODM can be acceptable in our company, we warmly welcome all customers to join us and work with you together in future!
FAQ:
1.What is your MOQ?
No MOQ, any quantity is acceptable in our company.
2.What is your delivery time?
The time of delivery is around15-20 days.
3.What is the shipping port?
We ship the goods via HangZhou and ZheJiang port.
4.What is your payment terms?
30% T/T in advance,70% at the sight of copy of B/L.
5.What is the location of your company?
Our company is located in the HangZhou, ZHangZhoug ,China.
We are warmly welcome you if you would like to have a visit.
6. Are you a manufacturer or trading company ?
Yes, we are a professional manufacturer in UPVC and CPVC products, and have almost 15 years.
7.Can you accept OEM or ODM?
Yes, OEM is welcomed, and also we cooperated with lots of customers according to your need.
8.Why choose us?
Because of professional, responsible, strict with things, excellent goods, competitive price, short of time answer, fast delivery. Warmly welcomed in Germany, Japan, Spain, Russia, Canada etc market.
| Standard: | DIN, GB |
|---|---|
| Material: | PVC |
| Connection: | Welding |
| Transport Package: | Cartons |
| Specification: | DN15-DN400 |
| Trademark: | HZVODE |
| Customization: |
Available
| Customized Request |
|---|
Types of Coupling
A coupling is a device used to join two shafts together and transmit power. Its primary function is to join rotating equipment and allows for some end movement and misalignment. This article discusses different types of coupling, including Magnetic coupling and Shaft coupling. This article also includes information on Overload safety mechanical coupling.
Flexible beam coupling
Flexible beam couplings are universal joints that can deal with shafts that are offset or at an angle. They consist of a tube with couplings at both ends and a thin, flexible helix in the middle. This makes them suitable for use in a variety of applications, from motion control in robotics to attaching encoders to shafts.
These couplings are made of one-piece materials and are often made of stainless steel or aluminium alloy. However, they can also be made of acetal or titanium. While titanium and acetal are less common materials, they are still suitable for high-torque applications. For more information about beam couplings, contact CZPT Components.
Flexible beam couplings come in a variety of types and sizes. W series couplings are good for general purpose applications and are relatively economical. Stainless steel versions have increased torque capacity and torsional stiffness. Flexible beam couplings made of aluminum are ideal for servo and reverse motion. They are also available with metric dimensions.
Flexible beam couplings are made of aluminum alloy or stainless steel. Their patented slot pattern provides low bearing load and high torsional rigidity. They have a long operational life. They also require zero maintenance and can handle angular offset. Their advantages outweigh the disadvantages of traditional beam couplings.
Magnetic coupling
Magnetic coupling transfers torque from one shaft to another using a magnetic field. These couplings can be used on various types of machinery. These types of transmissions are very useful in many situations, especially when you need to move large amounts of weight. The magnetic field is also very effective at reducing friction between the two shafts, which can be extremely helpful if you’re moving heavy items or machinery.
Different magnetic couplings can transmit forces either linearly or rotated. Different magnetic couplings have different topologies and can be made to transmit force in various geometric configurations. Some of these types of couplings are based on different types of materials. For example, a ceramic magnetic material can be used for applications requiring high temperature resistance.
Hybrid couplings are also available. They have a hybrid design, which allows them to operate in either an asynchronous or synchronous mode. Hysterloy is an alloy that is easily magnetized and is used in synchronous couplings. A synchronous magnetic coupling produces a coupled magnetic circuit.
Magnetic coupling is a key factor in many physical processes. In a crystal, molecules exhibit different magnetic properties, depending on their atomic configuration. Consequently, different configurations produce different amounts of magnetic coupling. The type of magnetic coupling a molecule exhibits depends on the exchange parameter Kij. This exchange parameter is calculated by using quantum chemical methods.
Magnetic couplings are most commonly used in fluid transfer pump applications, where the drive shaft is hermetically separated from the fluid. Magnetic couplings also help prevent the transmission of vibration and axial or radial loads through the drive shaft. Moreover, they don’t require external power sources, since they use permanent magnets.
Shaft coupling
A shaft coupling is a mechanical device that connects two shafts. The coupling is designed to transmit full power from one shaft to the other, while keeping the shafts in perfect alignment. It should also reduce transmission of shock loads. Ideally, the coupling should be easy to connect and maintain alignment. It should also be free of projecting parts.
The shaft couplings that are used in machines are typically made of two types: universal coupling and CZPT coupling. CZPT couplings are designed to correct for lateral misalignment and are composed of two flanges with tongues and slots. They are usually fitted with pins. The T1 tongue is fitted into flange A, while the T2 tongue fits into flange B.
Another type of shaft coupling is known as a “sliced” coupling. This type of coupling compensates for inevitable shaft misalignments and provides high torque. Machined slits in the coupling’s outer shell help it achieve high torsional stiffness and excellent flexibility. The design allows for varying engagement angles, making it ideal for many different applications.
A shaft coupling is an important component of any machine. Proper alignment of the two shafts is vital to avoid machine breakdowns. If the shafts are misaligned, extra force can be placed on other parts of the machine, causing vibration, noise, and damage to the components. A good coupling should be easy to connect and should ensure precise alignment of the shaft. Ideally, it should also have no projecting parts.
Shaft couplings are designed to tolerate a certain amount of backlash, but it must be within a system’s threshold. Any angular movement of the shaft beyond this angle is considered excessive backlash. Excessive backlash results in excessive wear, stress, and breakage, and may also cause inaccurate alignment readings. It is therefore imperative to reduce backlash before the shaft alignment process.
Overload safety mechanical coupling
Overload safety mechanical couplings are devices that automatically disengage when the torque applied to them exceeds a specified limit. They are an efficient way to protect machinery and reduce the downtime associated with repairing damaged machinery. The advantage of overload couplings is their fast reaction time and ease of installation.
Overload safety mechanical couplings can be used in a wide range of applications. Their automatic coupling mechanisms can be used on any face or edge. In addition, they can be genderless, incorporating both male and female coupling features into a single mechanism. This means that they are both safe and gender-neutral.
Overload safety couplings protect rotating power transmission components from overloads. Overload protection devices are installed on electric motors to cut off power if the current exceeds a certain limit. Likewise, fluid couplings in conveyors are equipped with melting plug elements that allow the fluid to escape when the system becomes too hot. Mechanical force transmission devices, such as shear bolts, are designed with overload protection in mind.
A common design of an overload safety mechanical coupling consists of two or more arms and hubs separated by a plastic spider. Each coupling body has a set torque threshold. Exceeding this threshold may damage the spider or damage the jaws. In addition, the spider tends to dampen vibration and absorb axial extension. This coupling style is nearly backlash free, electrically isolating, and can tolerate very little parallel misalignment.
A mechanical coupling may also be a universal joint or jaw-clutch coupling. Its basic function is to connect the driver and driven shafts, and limits torque transfer. These devices are typically used in heavy-duty industries, such as steel plants and rolling mills. They also work well with industrial conveyor systems.
CZPT Pulley
The CZPT Pulley coupling family offers a comprehensive range of couplings for motors of all types. Not only does this range include standard motor couplings, but also servo couplings, which require ultra-precise control. CZPT Pulley couplings are also suitable for engine applications where high shocks and vibrations are encountered.
CZPT Pulley couplings have a “sliced” body structure, which allows for excellent torsional stiffness and strength. They are corrosion-resistant and can withstand high rotational speeds. The couplings’ design also ensures accurate shaft rotation while limiting shaft misalignment.
CZPT Pulley has introduced the CPU Pin Type couplings, which are effective at damping vibration and maintain zero backlash. They are also made from aluminum and are capable of absorbing heat. They come with recessed tightening screws. They can handle speeds up to 4,000 RPM, and are RoHS-compliant.
editor by CX 2023-04-19
Wpo made in China – replacement parts – in Salem India Worm Gear Speed Reducer with ce certificate top quality low price
We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing facility in China with 5 distinct branches. For much more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Overview
———————————————————————————————————————————————————————————————————————————————–
Quick Information
Gearing Arrangement: Worm Brand Identify: EED
Enter Speed: 1400 rpm Certification: CE, ROHS, ISO9000
Rated Electrical power: 3 ~ 4KW Output Torque: 2.8-2430N.M
Coloration: Blue/Silver or on request Origin: ZHangZhoug, China (Mainland)
Warranty: 1 Year Ratio:1/ten.1/fifteen,1/20,1/25,1/thirty,1/forty,1/50,1/60
———————————————————————————————————————————————————————————————————————————————–
EPT Ability
EPT Potential: 20000 Piece/Items for each Thirty day period
Added Provider: OEM is welcome
QC Technique: ISO9001:2008
———————————————————————————————————————————————————————————————————————————————–
Packaging & Shipping
Package: Wood box/Paper carton
Port: HangZhou/ZheJiang or on request
———————————————————————————————————————————————————————————————————————————————–
one. Broadly used in turbines, shaft liners and axletrees, great resistance to donning, with high precision in
dimensions, reduced noise, superior centric operating castings
two. Without having vent and highly precision
three. The complete construction is compact and the excess weight is bigger
———————————————————————————————————————————————————————————————————————————————–
Recognize of installation
1 .Thebase-plate mu EPT be aircraft and stoutness, and the base-plate mu EPT be screwed downand shockproof.
2. Theconnecting shaft of key mover, reducer and operation gadget mu EPT be coaxialinstallation.
three .Thediameter tolerance zone of enter and output shaft is H6, the holes of fittings(this kind of as couplings, belt-
pulley, sprocket wheel and so on) mu EPT properly matethe shaft, which prevents bearing from breakage be-
-result in of above-loose mate.
four. Driverssuch as sprocket wheel and gear mu EPT be fitted close to bearings in get toreduce bending stre-
-ss of hanging shaft.
five. Whiteassembling motor of WPD reducer, it is required that proper amount of butterapplies to the worm
shaft input hole and keyway, avoiding assembling tootightly and rusting right after using for a extended time.
6. WhenOrdering or utilizing all varieties of WPD sort, if the motor excess weight is binger than thecommon, supporting
established is needed.
———————————————————————————————————————————————————————————————————————————————–
Notices of use
one .Ahead of making use of, make sure you check cautiously regardless of whether the reducer product, length, ratio, input connecting technique,
output shaft construction, enter and output shaftdirection and revolving route accord with requirement.
2 .According to the requirement of deciding on lubricant oil in the productmanual, please fill proper classification and
model lubricant. And then screw on thevent-plug Unlock the small cone-plug of vent-plug. Only soon after performing th-
ese, reducer is currently for commencing up working. The proper brand name and adequatelubricant oil is needed, replac-
ing oil in time conforming to the reque EPT ofproduct manual is also essential, specially soon after utilizing fir EPT a hundred h-
ours, it isrequired refilling new oil.
three .Whenabnormal situation happen, make sure you quit and examine reducer for each options andreasons for faults of
reducer (allowable highe EPT oil temperature is ninety five, underneath this temperature restrict, ifoil temperature no more goes
up, make sure you let reducer carry on managing.
About EPT since 1984
HangZhou Melchizedek Import & Export Co., Ltd. is a chief manufactur in system subject and punching/stamp
ing field because 1984. Our principal item, NMRV worm equipment speed reducer and collection helical gearbox, XDR,
XDF, XDK, XDShave arrived at the innovative method index of the congeneric European and Janpanese produc
ts, We offer normal gears, sprockets, chains, pulleys, couplings, bushes and so on. We also can acknowledge orders
of non-normal products, this kind of as gears, shafts, punching areas ect, in accordance to customers’ Drawings or sam-
ples.
Our firm has total set of equipment like CNC, lathes, milling devices, equipment hobbing equipment, g-
ear grinding equipment, gear honing device, gear shaping equipment, worm grinder, grinding equipment, drilling m-
achines, boringmachines, planer, drawing benches, punches, hydraulic presses, plate shearing devices and s-
o on. We have superior screening equipments also.
Our organization has established favorable cooperation relationships with sub-suppliers involving casting, uncooked mat-
erial, heat treatment method, area ending and so on.
The use of unique equipment manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating merchandise use and compatibility. Our company and the outlined alternative components contained herein are not sponsored, approved, or manufactured by the OEM.
