Magnetic pump coupling

For processing couplings, the data is still based on the standards of the Ministry of Machinery. If the coupling is designed without authorization, the torque is too large or the torque is too small, it will affect the use of the coupling. ...

The two shafts connected by the coupling, due to manufacturing and installation errors, deformation after load, and the influence of temperature changes, will cause changes in the relative position of the two shafts, and often cannot be strictly aligned. ...

LT elastic sleeve pin coupling relies on the locking force of the pin group to generate the frictional moment on the contact surface, and compress the rubber elastic sleeve to transmit the torque.It is suitable for small and medium-power shafting transmissions with good rigidity of the installation base, high centering accuracy, low impact load and low vibration reduction requirements. ...

The middle sliding block of the three-jaw coupling for the pump is made of cloth-clipped bakelite or polyurethane. It is light in weight, simple in structure, easy to install, and inexpensive. It is often used in small power applications. It is suitable for small torque, high speed, and no Two-axis connection with a sharp impact. ...

JZM type diaphragm coupling for heavy machinery has large load capacity, light weight, small structure size, transmission efficiency and transmission, good performance, easy assembly and disassembly, and has no relative sliding, no lubrication, long service life, no Noise, acid and alkali resistance, etc., can be used in high temperature, low temperature and oil, water and...