LT elastic sleeve pin coupling

For processing couplings, the data is still based on the standards of the Ministry of Machinery. If the coupling is designed without authorization, the torque is too large or the torque is too small, it will affect the use of the coupling. ...

The two shafts connected by the coupling, due to manufacturing and installation errors, deformation after load, and the influence of temperature changes, will cause changes in the relative position of the two shafts, and often cannot be strictly aligned. ...

The elastic sleeve pin coupling for pump uses a pin with an elastic sleeve (rubber material) at one end, which is installed in the flange hole of the two halves of the coupling to realize the connection of the two halves of the coupling. The material of the shaft device is cast iron, and its weight is 38.8 kg, which makes the motor waste a lot of...

TL type elastic sleeve pin coupling is based on the locking force of the pin group to generate the friction torque on the contact surface, and compress the rubber elastic sleeve to transmit the torque. It is suitable for the installation base with good rigidity and high centering accuracy. Small and medium power shafting transmissions with little impact load and low requirements for vibration reduction. ...

JZM type diaphragm coupling for heavy machinery has large load capacity, light weight, small structure size, transmission efficiency and transmission, good performance, easy assembly and disassembly, and has no relative sliding, no lubrication, long service life, no Noise, acid and alkali resistance, etc., can be used in high temperature, low temperature and oil, water and...