JZM diaphragm coupling for heavy machinery

There are many heating methods for metal heat treatment. Charcoal and coal have long been used as heat sources, and then liquid and gas fuels have been used. The application of electricity makes heating easy to control, and there is no environmental pollution. These heat sources can be used for direct heating, or through molten salt or Indirect heating of metals and even floating particles...

In addition to the elastic coupling's function of buffering and absorbing vibration, the magnetic pump coupling has the major feature that it breaks the traditional coupling structure and adopts a new principle of magnetic coupling to achieve no passage between the driving shaft and the driven shaft. Direct contact can transmit force and moment, and can...

The elastic sleeve pin coupling for pump uses a pin with an elastic sleeve (rubber material) at one end, which is installed in the flange hole of the two halves of the coupling to realize the connection of the two halves of the coupling. The material of the shaft device is cast iron, and its weight is 38.8 kg, which makes the motor waste a lot of...

TL type elastic sleeve pin coupling is based on the locking force of the pin group to generate the friction torque on the contact surface, and compress the rubber elastic sleeve to transmit the torque. It is suitable for the installation base with good rigidity and high centering accuracy. Small and medium power shafting transmissions with little impact load and low requirements for vibration reduction. ...